No one wants to wait in line for espresso, right? This machine lets you make two shots at once, so you can make drinks for two in half the time, and you can choose a single- or double-shot portafilter for different serving sizes. The machine has a 15-bar pump system and a frothing arm to make a creamy froth for your cappuccinos and lattes. An indicator light lets you know when the process is complete.
We opted to look only at “entry level” machines — those billed as semi-automatic and super-automatic — meaning they do some of the work for you. Manual machines, the third type, allow for more personalization but require a much longer learning curve and aren’t typically a good fit for first-time users. We also skipped models that couldn’t steam milk, ensuring that the best espresso maker is also the best cappuccino maker.
Water quality also plays a massive role in the way your coffee tastes. As we discovered in our review of the best water filters, water isn’t tasteless. Total dissolved solids (TDS) are what give “good tasting” water its sweetness — in fact, the SCAA recommends water with 150 milligrams per liter of TDS to brew coffee. (Want to check your water? A TDS reader is only about 15 bucks.)
The machine itself is large, but not as monstrous as some of the other grinders I tested. It's also very bottom-heavy, which makes it feel more durable than other machines and means it won't rattle all over your counter while grinding. The heavy-duty translucent plastic collection cup generates less static cling than the glossy clear plastic cups I tested, and the chute that connects the burrs to the cup collects less debris than other models. Cleaning is simple: Just remove the top burr and use the included wire brush to remove residual grounds.
A refinement of the piston machine is the pump-driven machine, which was introduced in the Faema E61 in 1961, and has become the most popular design in commercial espresso bars. Instead of using manual force, a motor-driven pump provides the force necessary for espresso brewing. Espresso machines are made to accept water directly from a cold water line supply, common in commercial installations, or from a separate tank that must be filled with water by hand. The latter is more common with lower-volume commercial installations and domestic espresso machines. Due to the required high pumping pressure and precision flow control needed, the particular type of electric pumps typically used are known as solenoid-piston pumps. These pumps are classified as a positive displacement type (general category) of pump.
An early variant technique, called a balance siphon, was to have the two chambers arranged side-by-side on a sort of scale-like device, with a counterweight attached opposite the initial (or heating) chamber. Once the near-boiling water was forced from the heating chamber into the brewing one, the counterweight was activated, causing a spring-loaded snuffer to come down over the flame, thus turning "off" the heat, and allowing the cooled water to return to the original chamber. In this way, a sort of primitive 'automatic' brewing method was achieved.
“On mornings when I don’t make a pour-over (weigh out the water, the beans, all that fun stuff), the Capresso drip machine yields the cleanest-tasting cup that brings out beans’ floral flavors, without burning the grinds or yielding an overly acidic cup. It’s also got a built-in, conical burr grinder, which saves you from having to buy a separate gadget, too.” — Kat Odell, author of Day Drinking
For many of us, the daily grind can't begin until we've had that first cup of piping hot coffee—so the right brewer is at the top of the list. The most basic coffee makers make at least a decent cup, but a little more money buys conveniences such as programmability, a thermal carafe to keep coffee hot longer, settings that let you adjust brew strength, and more.