All of the espresso machines we tested only included a single boiler for heating. This means that there's only one mechanism for heating both the water for brewing and the steamer wand. Because of this, it'll take the steamer wand a while to heat up after pulling the espresso shot, since the steamer wand operates at a much higher temperature than the brewing temperature of around 195°F. It is possible to buy a home machine with a double boiler (Breville makes one) but this raises the price significantly (we didn't test the Breville because it's over $1,000), and the minor wait time wasn't a major concern for us. We figured it wouldn't be for home brewers either.
You might have heard that purchasing a double-boiler espresso machine or a proportional-integral-derivative (PID) controller will give you more accuracy and control over temperature. They’re definitely features to dig into for advanced espresso crafters, but expect to pay an additional $400 for a PID and $800+ for a second boiler. Since we wanted to focus on beginner machines, we stuck to single-boiler models without PID controllers for this review.
‡Pre-Infusing: Pre-infusing is a technique where the dry coffee grounds are initially saturated with hot water, allowing a “bloom” of carbon dioxide to escape. This 45-second(ish) process puts hot water into contact with more surface area around each ground throughout the brewing process, as it’s no longer competing with the escaping gas bubbles. It can improve the quality of the final product, since this more uniform contact creates a more even extraction. It’s a feature that six of the 10 pots we tested incorporated into their designs — as well as all four of our top picks.
Instead, our main concern was how well the wand incorporated air and steam into the mix for velvety, frothy texture. In our testing with our coffee expert, he pointed out that inferior steamer wands made giant air bubbles that quickly popped and only pumped air into the milk, without incorporating foam consistently throughout. So, we looked for a steamer wand that made consistent, well-incorporated foam.
Like the OXO machines, it has only one button on its interface. Unlike the OXO machines, that button does only one thing: start the brewing process. If you hold it down until it blinks, you’ll activate the pre-infusion; otherwise a simple click gets it going. Brewing a full pot of eight cups took us about seven minutes, by far the fastest of any of our top picks — which is a good thing, considering you can’t program it to start brewing before you wake up.
The best part about this machine is that it comes with everything you need (except the beans). You don't have to spend an extra $100+ on a good grinder or $25-$100 on a milk frothing pitcher and tamper. You will pay a bit more for it than other machines on this list, but it's well worth it — especially now that this machine costs $548.96 instead of $999.99.
We opted to look only at “entry level” machines — those billed as semi-automatic and super-automatic — meaning they do some of the work for you. Manual machines, the third type, allow for more personalization but require a much longer learning curve and aren’t typically a good fit for first-time users. We also skipped models that couldn’t steam milk, ensuring that the best espresso maker is also the best cappuccino maker.
The gist: This machine is clearly a fan favorite, as it’s raked in over 2,400 reviews on Amazon, giving it an average of 4 out of 5 stars — with over 60% of users awarding it a perfect 5 star rating. The machine comes with a lot of bragging rights. Not only is it “Amazon’s Choice” for super-automatic espresso machines, it’s also their #1 best seller.
There were lots of innovations from France in the late 18th century. With help from Jean-Baptiste de Belloy, the Archbishop of Paris, the idea that coffee should not be boiled gained acceptance. The first modern method for making coffee using a coffee filter—drip brewing—is more than 125 years old, and its design had changed little. The biggin, originating in France ca. 1780, was a two-level pot holding coffee in a cloth sock in an upper compartment into which water was poured, to drain through holes in the bottom of the compartment into the coffee pot below. Coffee was then dispensed from a spout on the side of the pot. The quality of the brewed coffee depended on the size of the grounds - too coarse and the coffee was weak; too fine and the water would not drip the filter. A major problem with this approach was that the taste of the cloth filter - whether cotton, burlap or an old sock - transferred to the taste of the coffee. Around the same time, a French inventor developed the "pumping percolator", in which boiling water in a bottom chamber forces itself up a tube and then trickles (percolates) through the ground coffee back into the bottom chamber. Among other French innovations, Count Rumford, an eccentric American scientist residing in Paris, developed a French Drip Pot with an insulating water jacket to keep the coffee hot. Also, the first metal filter was developed and patented by French inventor.
For all the debate over whether the best coffee comes from a Chemex or a French press or an AeroPress (even Nespresso), sometimes you just want to turn on a machine and let it do the work. We asked ten coffee drinkers — food-industry professionals and just plain coffee snobs — what’s the coffee machine that’ll get you a simple at-home brew without all the fuss?
From there, it’s up to your personal preference. Arabica beans have a higher acidity, with notes of fruit and berries. Robusta beans are darker and richer, with more caffeine. Different levels of roasts — light, medium, dark — determine how much of the beans’ oils will break through the surface of the bean, which also affects acidity, flavor, and caffeine levels. “Get to know your local coffee expert,” recommends Awan. Nothing beats a conversation with a barista or local coffee roaster who can help you try different beans and roasts, and to experiment with those variables in real time. Finding your favorite is all part of the fun.
Our brew-performance tests measure the brew temperature and contact time (how long water stays within a sweet spot of 195° to 205° F for brewing). We measure concentration using a refractometer, a device that measures the amount of coffee dissolved in each brew. Our convenience tests look at how easy it is to set timers, fill the reservoir, clean the machine, and more. And for the first time, we’re incorporating predicted reliability and owner satisfaction ratings into the new Overall Score for each model. We determine these ratings for each drip coffee maker brand using survey data collected from thousands of CR members.