That water is heated in a detachable reservoir that doubles as a kettle. This is a unique feature for a coffee maker, but one we ended up appreciating, especially for households with a mix of tea lovers and instant-oatmeal eaters alongside coffee drinkers. Fill the kettle up, lock it in place, and scroll the dial to the amount of coffee you want brewed. The machine is designed so that, even if you have more water in the kettle than you need, it will brew only the amount you specify. The one thing you actually have to measure with the OXO On 12-Cup is the grounds. Do that right, and it’s pretty much impossible to screw it up.

The Mr. Coffee Optimal Brew coffee maker System has a highly modular design, with its rectangular water reservoir easily sliding in and out of the chassis. For those who only want a cup of basic coffee, you will find that the Mr. Coffee Optimal Brew coffee maker System will do that very well – its "brew now" button is found on the front of the machine.


As a coffee nut, coffee-shop lover, and former professional barista, I don’t normally make recommendations for home espresso equipment. Not because I don't want you to have delicious espresso at home, but because it takes a lot of practice and a lot of burned fingers to learn to make espresso well. Many people invest in an espresso machine like they invest in the exercise equipment that becomes a very expensive coat rack: If you're going to buy it and never use it, you're almost always better off going to the local café.

While we love the all-inclusive features of the Breville, there’s one thing it can’t do on its own, at least not without a hefty repair bill. If you love dark roasts, any machine that features an internal grinder is off-limits. The oily shine characteristic of dark roasts builds up in any grinder — but while you can disassemble and clean standalone grinders, this is rarely an option for internal ones. The residual oil left in an internal grinder will, at best, give future shots a rancid flavor. At worst, the oil will clog the grinder. If you want to brew dark roasts on the Breville, plan on buying a separate grinder.
"I've wanted an espresso machine for a while now but just don't have the room for it. I started researching the Nespresso line and wasn't sure how I'd like it at first. I am not usually a fan of pod style coffee machines and was worried about how well this would perform. I got the Pixie model because I don't have a big kitchen and this thing takes up barely any space on my counter. The water heats up quickly so in less than a minute you can have a cup of espresso. As other people have mentioned, it is kind of loud but it is only for a few seconds and doesn't seem to disturb anyone else in my house. The few seconds of noise is worth it for me to have a delicious latte a few minutes later. There is a little box that collects the pods (up to 10 I think) for easy disposal. I also feel like the Nespresso pods have a much better flavor that other pod coffee. If you want a quick espresso and don't have a lot of space for a machine then I highly recommend the Pixie. I am very happy with it and use it daily."
Let’s circle back to that extra-long brew time. There are two factors that didn’t make it an automatic “no” for us. The first is that the OXO On 12-Cup is programmable. Like our experts say, grinding coffee in advance isn’t going to make the most perfect cup of coffee. But the fact that you can program the machine’s “wake-up time” to start brewing and have coffee ready when you are takes the sting out of the wait.
A cafetiere (Coffee Plunger, French press in US English) requires coffee of a coarser grind than does a drip brew coffee filter, as finer grounds will seep through the press filter and into the coffee.[2] Coffee is brewed by placing the coffee and water together, stirring it and leaving to brew for a few minutes, then pressing the plunger to trap the coffee grounds at the bottom of the beaker.

Some machines use a single boiler kept at steaming temperature, but water for brewing is passed through a heat exchanger, taking some heat from the steam without rising to the same temperature. Although the water for brewing remains at a lower range than that required for steaming milk, it is still too hot for proper coffee extraction without first cooling; thus this type of machine requires a cooling flush of 4–6 seconds prior to the first espresso pull. Once the machine is dialed into the proper temperature, as many shots can be pulled as required without refreshing. However, if the user leaves the machine idle again for some period, the flushing process will need to be repeated. The HX variety is found in many mid-range machines and many users install thermometers to assist them is dialing in correct temperatures. There is some controversy as to the temperature stability of the brewing water, since it is indirectly converted from steaming temperature to brewing temperature, rather than kept at a brewing temperature.


An early variant technique, called a balance siphon, was to have the two chambers arranged side-by-side on a sort of scale-like device, with a counterweight attached opposite the initial (or heating) chamber. Once the near-boiling water was forced from the heating chamber into the brewing one, the counterweight was activated, causing a spring-loaded snuffer to come down over the flame, thus turning "off" the heat, and allowing the cooled water to return to the original chamber. In this way, a sort of primitive 'automatic' brewing method was achieved.
Our bean-to-cup espresso machines are easy to clean, with front-accessible components and a removable water tank and drip tray for easy cleanup. Many of our machines also have indicators that remind you when it’s time to clean your espresso machine, so you don’t have to worry about a build-up of limescale putting strain on your machine. Our espresso machines are best cleaned using the De’Longhi descaling solution, which has been proven to be up to three times as effective as regular lime scale removers. 
A new French press is an ideal companion on a camping trip or picnic. Our sturdy versions of French presses are available in glass, metal, ceramic and other materials. Invest in your own efficient single-cup brewers with included cups and thermal mugs to create on-the-go coffee drinks for one person. Cold-brew machines and kits are other terrific options when you prefer chilled and iced coffee beverages. Remember to order plenty of filters, tampers, descaling tabs and other coffee accessories to keep your machine fresh and bright. Clean machines with the right size filters brew the best coffee
×