“We really love this machine because we love great coffee, but we don’t make frothy milk drinks. This machine produces very, very good coffee from scratch at the push of a button, automatically grinding the beans pumping through hot water, and dumping out the “puck” of coffee grounds into the internal bin. It’s a nice compact size, and fits easily on a counter under the cabinets.”
The OXO On 12-Cup feels high-tech without being high maintenance. It’s beautifully constructed, with silicone gaskets, a stainless steel carafe, and sturdy-feeling plastic. But let’s go ahead and get its biggest downside right out there in the open. Of the 10 machines we tested, it took the longest to brew eight cups of coffee — nearly 15 minutes. It heats its entire reservoir of water to temperature before a drop touches the grounds, and if you’re jonesing for a full pot to start off your day, that wait is going to feel like a lifetime. This was particularly noticeable considering four of the machines we tested brewed the same amount of coffee in less than half that time. The Bunn BTX-B Velocity Brew could do it in three minutes flat.
The term dual boiler is used narrowly for machines with two separate boilers, and more broadly for what are more properly called dual heater (DH) machines, featuring a boiler for brewing and a separate thermoblock (TB) for heating brew water to steaming temperature – opposite to HX machines, where the boiler is at steaming temperature and is cooled to brewing temperature.
As for the seller: when the unit was originally delivered the steam wand wasn't performing well. After following the typical trouble-shooting tips and conferring with the seller, we found the unit was simply unable to produce enough pressure to steam or properly brew. Within a week the seller had replaced the unit, and I'm happy to report it works perfectly. No matter the production value there is always a possibility of a defect here or there. The seller standing by the product and immediately replacing it to our satisfaction really sealed the deal for us. I highly recommend both this product and the seller from whom we purchased it."
“This is simply an amazing machine. I have had NO trouble with it whatsoever. … The quality of the espresso is better than what I get out of the coffee shops — using their beans. It took me a long time to tune in the perfect cup of espresso/latte/cappuccino, and there are variables, but mostly in the beans you buy. I had to buy a decent burr grinder, but considering the investment in the machine, another $150 for a good burr grinder is nothing. I only run filtered water through the machine. I love this machine. I have poured over 2,500 shots through it. Not a single problem with the machine. Many mistakes by the operator, but I will take my espresso out of this machine before any store bought cup-o-Joe.”
An electric drip coffee maker can also be referred to as a dripolator. It normally works by admitting water from a cold water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminum), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally-induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10-12 cup drip coffeemaker, using a more powerful thermostatically-controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminum construction of most heating chambers to a metal with superior heat transfer qualities, such as copper.
The method for making coffee in a percolator had barely changed since its introduction in the early part of the 20th century. However, in 1970 General Foods Corporation introduced Max Pax, the first commercially available "ground coffee filter rings". The Max Pax filters were named so as to compliment General Foods' Maxwell House coffee brand. The Max Pax coffee filter rings were designed for use in percolators, and each ring contained a pre-measured amount of coffee grounds that were sealed in a self-contained paper filter. The sealed rings resembled the shape of a doughnut, and the small hole in the middle of the ring enabled the coffee filter ring to be placed in the metal percolator basket around the protruding convection (percolator) tube.
You have a business plan, a great location, and the perfect name with an awesome logo to go with it, but now that it's time to supply your coffee shop , you're unsure of where to start. Well, even though specific requirements will vary from business to business, we've developed a comprehensive coffee shop equipment list to get you started. To get an idea of the equipment needed when opening a coffee shop, take a look at the information below, or for a quick reference, check out our printable coffee shop equipment list!
If you’re ready to drop serious money on a high-quality espresso machine that produces smooth, complex shots, our pick is the Rocket Espresso Appartamento Espresso Machine. The machine lets you cycle quickly between steaming milk and pulling espresso: It uses a heat exchanger, rather than the more typical thermoblock, which means that the Rocket’s boiler heats all the way up to milk-steaming temperatures when you first turn it on. When you’re ready to pull shots, the heat-exchanger sends a burst of cool water through a copper tube in the boiler, bringing the temperature briefly back to espresso-friendly levels before heating back up.
Its straightforward ethos is conceptualized in the simple design and operations of the machine. You can conveniently pour up to 44 ounces or 1.3 liters of water into the water tank, then add spoonfuls of your favorite coffee grounds to the basket, and finally flip the switch and sit back as you see the water slowly travel from the tank over to the shower head
A refinement of the piston machine is the pump-driven machine, which was introduced in the Faema E61 in 1961, and has become the most popular design in commercial espresso bars. Instead of using manual force, a motor-driven pump provides the force necessary for espresso brewing. Espresso machines are made to accept water directly from a cold water line supply, common in commercial installations, or from a separate tank that must be filled with water by hand. The latter is more common with lower-volume commercial installations and domestic espresso machines. Due to the required high pumping pressure and precision flow control needed, the particular type of electric pumps typically used are known as solenoid-piston pumps. These pumps are classified as a positive displacement type (general category) of pump.
“Small things CAN bring you joy. My recent purchase of this Zojirushi coffee maker has made me very happy. Sounds like a commercial, but consider this … Last year, I bought a more expensive coffee maker that made terrible coffee! Instead of using the machine, I started making pour-overs. Something I hate to do … A year and a bunch of customer reviews later, I ordered this new baby, and I am so happy, I am writing about it here. I don’t know if it’s the water filter that water passes through or the fact that the water is introduced to the coffee a little bit differently, but the result is what I consider a perfect cup of coffee.”
All the machines we tested came with either insulated carafes or glass pots with built-in warmers. Both have pros and cons. Glass pots are typically easier to clean because they tend to have wider mouths, and the lack of internal insulation means that glass pots will have a greater interior volume relative to its exterior volume — basically, it’s easier to get your hand or dish sponge into a glass pot. On the other hand, glass pots are more fragile and have to be heated from a base plate. In our tests, those base plates could even raise the temperature of the coffee, like with the CuisinArt, which can make coffee taste burnt.
An early variant technique, called a balance siphon, was to have the two chambers arranged side-by-side on a sort of scale-like device, with a counterweight attached opposite the initial (or heating) chamber. Once the near-boiling water was forced from the heating chamber into the brewing one, the counterweight was activated, causing a spring-loaded snuffer to come down over the flame, thus turning "off" the heat, and allowing the cooled water to return to the original chamber. In this way, a sort of primitive 'automatic' brewing method was achieved.
CR’s take: The Cuisinart Coffee on Demand is a self-serve model. It stores 12 cups of brewed coffee in a reservoir and has a dispenser instead of a carafe. It makes sense in homes where people are drinking coffee at different times; it keeps coffee hot and ready, so family and guests can fill their own cups. This model is programmable and features a water filter and a cleaning indicator. The reservoir can be removed for washing. In our tests, the Coffee on Demand performs quite well, receiving a Very Good rating for convenience. At less than $100, it can be a terrific choice for entertaining.