The simplicity starts with its design: a single button with a scrolling dial underneath an LED interface. That button is the only one on the entire machine. With it, you set the time, set the water temperature, set how many cups you want brewed, and when you want the brewing to start. It takes a second to get the hang of it, but we were impressed with how intuitive it is — a stark contrast to a machine like the Moccamaster KBT 10-Cup Coffee Brewer, which had so many extra pieces, it required constant consultation of the instruction manual.
The piston-driven, or lever-driven, machine was developed in Italy in 1945 by Achille Gaggia, founder of espresso machine manufacturer Gaggia. The design generically uses a lever, pumped by the operator, to pressurize hot water and send it through the coffee grinds. The act of producing a shot of espresso is colloquially termed pulling a shot, because these lever-driven espresso machines required pulling a long handle to produce a shot. Lever-driven espresso machines are sometimes called manual espresso machines because of this.
A good grinder: An even grind is essential for drinkable espresso. In fact, if you’re trying to save money, most experts recommend cheaping out on your espresso machine rather than your grinder. Since we wanted to make sure our machines had the best chance of making great espresso, we started with a $600 grinder recommended to us by Seattle Coffee Gear.
The Hamilton Beach 12 Cup BrewStation coffee maker offers convenient one-hand dispensing without a conventional glass carafe. There's no pouring or spills, and nothing fragile to break and replace. No matter how much you try, it’s impossible to get freshly brewed flavor from coffee that’s been sitting on a hot plate too long. That’s why ion was created, the only coffeemaker that keeps coffee tasting fresh for up to four hours. This best-selling coffee maker works just like a traditional...
An espresso machine brews coffee by forcing pressurized water near boiling point through a "puck" of ground coffee and a filter in order to produce a thick, concentrated coffee called espresso. The first machine for making espresso was built and patented in 1884 by Angelo Moriondo of Turin, Italy. An improved design was patented on April 28, 1903, by Luigi Bezzera. The founder of the La Pavoni company bought the patent and from 1905 produced espresso machines commercially on a small scale in Milan. Multiple machine designs have been created to produce espresso. Several machines share some common elements, such as a grouphead and a portafilter. An espresso machine may also have a steam wand which is used to steam and froth liquids (such as milk) for coffee drinks such as cappuccino and caffe latte.
The impact of science and technological advances as a motif in post-war design was eventually felt in the manufacture and marketing of coffee and coffee-makers. Consumer guides emphasized the ability of the device to meet standards of temperature and brewing time, and the ratio of soluble elements between brew and grounds. The industrial chemist Peter Schlumbohm expressed the scientific motif most purely in his "Chemex" coffeemaker, which from its initial marketing in the early 1940s used the authority of science as a sales tool, describing the product as "the Chemist's way of making coffee", and discussing at length the quality of its product in the language of the laboratory: "the funnel of the CHEMEX creates ideal hydrostatic conditions for the unique... Chemex extraction." Schlumbohm's unique brewer, a single Pyrex vessel shaped to hold a proprietary filter cone, resembled nothing more than a piece of laboratory equipment, and surprisingly became popular for a time in the otherwise heavily automated, technology-obsessed 1950s household.
“On mornings when I don’t make a pour-over (weigh out the water, the beans, all that fun stuff), the Capresso drip machine yields the cleanest-tasting cup that brings out beans’ floral flavors, without burning the grinds or yielding an overly acidic cup. It’s also got a built-in, conical burr grinder, which saves you from having to buy a separate gadget, too.” — Kat Odell, author of Day Drinking
CR’s take: If you’re an aficionado of fresh ground coffee, this Black+Decker is the brewer to buy. As the name suggests, the Mill & Brew goes that extra mile, grinding whole coffee beans just before brewing. As a result, the machine is capable of making a great pot of coffee. Made of plastic with stainless steel accents, this model is easy to use and to clean, earning a Very Good rating in our convenience tests. It allows you to adjust brew strength, and it’s programmable, so you can set it to grind and brew just before you wake up.