Some machines use a single boiler kept at steaming temperature, but water for brewing is passed through a heat exchanger, taking some heat from the steam without rising to the same temperature. Although the water for brewing remains at a lower range than that required for steaming milk, it is still too hot for proper coffee extraction without first cooling; thus this type of machine requires a cooling flush of 4–6 seconds prior to the first espresso pull. Once the machine is dialed into the proper temperature, as many shots can be pulled as required without refreshing. However, if the user leaves the machine idle again for some period, the flushing process will need to be repeated. The HX variety is found in many mid-range machines and many users install thermometers to assist them is dialing in correct temperatures. There is some controversy as to the temperature stability of the brewing water, since it is indirectly converted from steaming temperature to brewing temperature, rather than kept at a brewing temperature.
*SCAA Certified: A Specialty Coffee Association of America certification indicates the machine can heat water to a temperature between 195 and 205 degrees Fahrenheit and ensures that hot water will be in contact with coffee grounds for no less than four and no greater than eight minutes. It’s a solid confirmation of quality. But according to Joseph Rivera, a research coffee scientist at coffeechemistry.com, not every manufacturer chooses to submit their coffee makers for SCAA certification, and there are definitely great drip coffee makers out there without its stamp of approval. Six of the 10 coffee makers we tested are SCAA-certified — including all four of our top picks.
“I actually didn’t start drinking coffee on a regular, daily basis until four or five years ago. I got hooked on the smoothness and low acidity of cold-brewed coffee, and for the longest time, my ritual each morning was to visit Gimme! near my house on Lorimer. Recently, though, I’ve started making cold brew myself at home with the OXO Good Grips Cold Brew Coffee Maker. It’s not a true drip-coffee machine, but I’ve been very happy with this piece of equipment — it lets me tinker with different beans and concentrations, and produces enough cold brew to last me two weeks at a time. It also stacks compactly for storage, which is an absolute requirement for my tiny New York apartment.” — Dennis Ngo, caterer at Lonestar Empire
The very first espresso machines worked on a steam-pressure basis, and they’re still in use today. With this type of machine, steam or steam pressure is used to force water through the coffee grounds and produce espresso. Some steam-driven machines can produce a measure of foam “crema.” But they can’t generate enough pressure or provide the precise temperature control necessary to produce true espresso: They simply make a very strong cup of coffee. However, they cost considerably less than pump-driven machines. Our verdict is that if you’re a true espresso lover and seeking to make a good shot at home, we recommend you steer clear of steam-driven machines. They’ll likely disappoint you.
Our coffee machines are easy to use, and are designed with glass or thermal carafes and non-stick warming plates to keep your drip coffee warm long after the brewing process is over. Your coffee machine will alert you when it has finished brewing, and, depending on the model, will have either an automatic shut-off or a freshness indicator to ensure you never need to drink stale coffee again.
The dishwasher-safe, BPA free model from Takeya can brew up to a quart of concentrated cold brew coffee. It not only yielded one of the best tasting brews, it also aced our usability tests. The brewer is easy to set up, offers a durable build, and is simple to clean and store for later use. It is also the only brewer that is air-tight while it brews, allowing you to easily store the brewer on its side in a packed fridge.
In France, in about 1710, the Infusion brewing process was introduced. This involved submersing the ground coffee, usually enclosed in a linen bag, in hot water and letting it steep or "infuse" until the desired strength brew was achieved. Nevertheless, throughout the 19th and even the early 20th centuries, it was considered adequate to add ground coffee to hot water in a pot or pan, boil it until it smelled right, and pour the brew into a cup.
“Quite possibly the best investment I’ve made in an appliance to date. This powerful machine makes THE BEST COFFEE. I’m a coffee snob, so Keurig never impressed me, and I don’t have the space to purchase a full espresso machine. The Ninja system is compact, but offers a variety of brewing settings. Very easy to clean. Huge fan of this brand in general, and I’m so glad I made this purchase. Even comes with a travel mug.”
In terms of maintenance, more complex machines tend to require more cleaning. Accessories like pumps, boiler setups, and thermostats usually forecast the amount of cleanup and maintenance that will be required over time. Buyers should be aware that machines with plastic outer coatings can crack with repeated use, leading to the need for expensive repairs or even replacement.
The gist: This espresso maker by LavoHome comes with all the essentials: a glass carafe and cover, filter basket, and tamper. The little powerhouse boasts 800 watts of power and brews up to 20 ounces of rich espresso. In the mood for a latte or cappuccino instead? It also comes equipped with a powerful steamer to make all of your favorite coffeehouse beverages. The glass decanter comes with a cool-touch handle for safe and easy pouring once your brew is complete.
If you push the 54mm stainless steel portafilter into the hands-free grinding cradle, the grounds will go right into the filter. The grinder shuts off when it's done, too, so you don't have to worry about figuring out if you've got the right amount. Finally, the included 54mm tamper ensures that your grounds are evenly pressed, so you get the most out of your beans.
“I am a coffee snob, and one of my favorite things about traveling to Europe is their espresso and cappuccinos. A couple years ago, I bought a Nespresso Aeroccino machine for making froth and a stovetop Moka pot for making espresso; the system has worked fine, but the espresso can take awhile to make (around 5-8 minutes) and there’s definitely a learning curve to making good coffee with it. … [How] does this machine do [in comparison]? Stellar. Absolutely stellar. Once the water is in and it heats up, you flip up a lever, drop in the pod, and press the size button (espresso or lungo). Off it goes! Brewing is super quick and the espresso always comes out with a beautiful crema on top. My first drink was a cappuccino, and it was so much better than the ones I’ve been making with my Moka pot! …
The machine itself is large, but not as monstrous as some of the other grinders I tested. It's also very bottom-heavy, which makes it feel more durable than other machines and means it won't rattle all over your counter while grinding. The heavy-duty translucent plastic collection cup generates less static cling than the glossy clear plastic cups I tested, and the chute that connects the burrs to the cup collects less debris than other models. Cleaning is simple: Just remove the top burr and use the included wire brush to remove residual grounds.
"I've wanted an espresso machine for a while now but just don't have the room for it. I started researching the Nespresso line and wasn't sure how I'd like it at first. I am not usually a fan of pod style coffee machines and was worried about how well this would perform. I got the Pixie model because I don't have a big kitchen and this thing takes up barely any space on my counter. The water heats up quickly so in less than a minute you can have a cup of espresso. As other people have mentioned, it is kind of loud but it is only for a few seconds and doesn't seem to disturb anyone else in my house. The few seconds of noise is worth it for me to have a delicious latte a few minutes later. There is a little box that collects the pods (up to 10 I think) for easy disposal. I also feel like the Nespresso pods have a much better flavor that other pod coffee. If you want a quick espresso and don't have a lot of space for a machine then I highly recommend the Pixie. I am very happy with it and use it daily."
This grinder produced the most even grounds out of all the machines I tested, and its range of output is all-encompassing. The coarsest setting produces large flakes, while the finest setting produces puffy grounds akin to powdered sugar—perfect for Turkish coffee. In between, I was quickly able to find the ideal settings for my Hario Woodneck, Aeropress, and even mason jar cold brew.
Espresso is wonderful, but if you also like regular coffee with breakfast or decaf with dinner, this machine can do it all – and you can use your own coffee rather than proprietary pods or cups. Not only does this make a variety of coffee types, it also brews coffee in a large variety of sizes, from a cup to a carafe and four sizes in between, so you can make just the right amount, whether it’s just for you, or whether you’re serving company
Running hard water through your coffee equipment can lead to mineral buildup and calcification on your heating elements. If you’re looking to get the most out of your commercial coffee maker , then it’s important to make sure it’s properly cleaned. Cleaning your coffee maker will not only prolong its life span, but it will also improve the taste of your coffee. You should be cleaning and deliming your machine at least once every six months, however if the water you use is extremely hard, you may need to clean it every month. Follow our video and step-by-step instructions to get your coffee maker back in top shape, and don't forget to set up a water filtration system for your coffee equipment to cut down on mineral buildup in the future. Step-by-Step Instructions for How to Clean a Coffee Maker 1. Unplug the coffee maker. 2. Wipe down the machine with a damp towel. After you're finished wiping down your machine, you should plug it back in to begin the deliming process. 3. Mix 10 oz. of lemon juice with 32 oz. of water. 4. Pour the mixture into the water reservoir. 5. Turn your coffee machine on as if you are brewing a pot of coffee. 6. Once your coffee machine has finished its brewing cycle, remove the machine's spray head. 7. Remove any residue that may be blocking the holes on the spray head. 8. Insert a deliming spring into the opening where the spray head was. In a sawing motion, move the deliming spring back and forth about 5-6 times. Run two or three brewing cycles with plain water in order to remove any traces of lemon water solution. 9. Wash the coffee filter with warm, soapy water.
It also automatically pre-infuses the coffee, allowing the grounds to vent their CO2 and “bloom.” Remember, only half of the machines we tested had this feature, and it proved to pay off in our taste tests. The four machines we recommend all pre-infuse. Only one coffee maker without it, the Hamilton Beach, performed well at all in our taste tests — but that guy was so cheap and flimsy, part of the brew basket broke during our testing. Sorry, Hamilton Beach.
The term dual boiler is used narrowly for machines with two separate boilers, and more broadly for what are more properly called dual heater (DH) machines, featuring a boiler for brewing and a separate thermoblock (TB) for heating brew water to steaming temperature – opposite to HX machines, where the boiler is at steaming temperature and is cooled to brewing temperature.
CR’s take: If you’re an aficionado of fresh ground coffee, this Black+Decker is the brewer to buy. As the name suggests, the Mill & Brew goes that extra mile, grinding whole coffee beans just before brewing. As a result, the machine is capable of making a great pot of coffee. Made of plastic with stainless steel accents, this model is easy to use and to clean, earning a Very Good rating in our convenience tests. It allows you to adjust brew strength, and it’s programmable, so you can set it to grind and brew just before you wake up.