“I LOVE my Breville. I am a career barista. I have had this machine for almost a year now and waited to write a review until now so I wasn’t blinded by the initial excitement of purchasing a home espresso machine. I love to buy more expensive coffee from third-wave roasters, and this machine is so easy to dial in, I come away with professional shots almost every time. While this may be due to my experience in the shop, I will say that my husband is not a barista and picked up dialing in pretty fast using the Breville guides [that were] included. My only complaint is that the steaming wand is not the best. It takes a couple tries starting it up to get it going full blast some mornings, but I have always been able to achieve latte art. That is a very small complaint considering this machine is half the price of its competitors but still can create some awesome coffee. I’d highly recommend it for baristas on a budget.”
There’s also no way to adjust the temperature of the water on the Bonavita, or tinker with any of the other variables some of our other top picks gave access to. And that’s the other downside to this excellent machine: What you get is what you get, and if you do want to experiment with the flavor of your coffee, it will depend entirely on the beans you buy and the size you grind them to. Good thing the coffee it brews right out of the box is so dang good.
We tested 12 models by making shots of espresso and lattes on each machine. We enlisted the help of an expert from Students of Coffee, a group of coffee educators and roasters at New York University, to judge for quality. The majority of the models we tested were semi-automatic, meaning brewers still have to grind the coffee and pack it in the portafilter (the little filter cup with a wand that you place in the front of the machine). Semi-automatic espresso machines heat the water for you, and then pump it through the grounds at varying levels of pressure, depending on the machine. The semi-automatic models we tester were:
In later years, coffeemakers began to adopt more standardized forms commensurate with a large increase in the scale of production required to meet postwar consumer demand. Plastics and composite materials began to replace metal, particularly with the advent of newer electric drip coffeemakers in the 1970s. During the 1990s, consumer demand for more attractive appliances to complement expensive modern kitchens resulted in a new wave of redesigned coffeemakers in a wider range of available colors and styles.
The gist: This "all-in-one" machine includes pretty much everything you need to make quality espresso, minus the beans. It's Amazon's choice for "espresso and cappuccino maker combos" and has a rating of 4.1 stars. It comes with its own electric bean-grinder, a 1.25 liter removable water tank, a measuring spoon and tamper, a stainless steel filter with two basket options, a stainless steel milk frothing cup, and two 3.6-ounce espresso cups. The machine brews espresso with 15 bars of pressure and with the Thermoblock fast heating system, it's ready to use in 45 seconds. The two portafilter baskets allow you to pull either a single or double shot drink.
"A rare example of the meeting of form and function. This machine is both beautiful to look at and makes wonderful delicious espresso and cappuccino. I was hesitant to spend this much on a "coffee maker", but took into consideration what it costs to get a decent cappuccino from a cafe or Starbucks and finally gave in. Boy am I glad I did. All it takes to get me out of bed in the morning is the happy thought of pulling yet another delicious shot from this wonderful machine."
“I purchased the machine for myself as a birthday present, and I’ve had it for about six weeks. We have a Pavoni espresso machine, which my husband loves for his espressos, but I think it’s a pain for making lattes: grinding the beans, tamping down the pod, ‘pulling’ the lever (which will be really hard if you tamp it too densely), steaming the milk, and then cleaning the steaming wand, not to mention what a pain it is to refill the water chamber (turn off, wait till pressure is gone, then you can refill). Why am I listing all of these steps? Because that’s what you don’t have to worry about with the Lattissima! Here are my steps now: Turn on the machine, get the milk container out of the fridge and plug it into the front, put an espresso capsule in the top, stick a mug under the spout, and push the Latte button. Done. You do need to clean the frother, which is just putting another cup under the spout, turn the milk to “clean” and let it clean, then you can remove the milk container and stick it in the fridge. I clean the milk container once a week, soaking all the pieces in a bowl of hot, soapy water for a few hours.”
Why it's great: Bialetti is a trusted name brand in the motherland of espresso: Italy. According to their page, you can find a Bialetti product in nine out of ten households in Italy. Point being: they know a thing or two about a quality machine. The Bialetti Stovetop is really nothing fancy. No electronics, no buttons to push. Just fill the bottom chamber with water, fill the second chamber with ground coffee beans, put it on the stove, and wait for the coffee to start coming out the top. Boom. The coffee is fresh and the machine maintenance is basically nothing.
Finally, the design and extra tools that the Breville machine comes with are impeccable. It includes a large drip tray to catch spilled coffee and milk and has a sensor that lets you know when the tray is too full. It also has a compartment under the drip tray that allows you to store the extra filters the machine comes with. It includes a hefty, stainless steel milk steaming jug and a tamper for pressing the expresso grounds down. Other machines' tampers are made of flimsy plastic that left loose grounds around the sides of the portafilter, but the Breville tamper is made of thick, durable plastic and metal. It's strong enough to actually work well at compacting the grounds, plus it's perfectly sized to fit the entire circumference of the portafilter, reaching all of the grounds and not leaving loose stragglers. There's also a magnetic slot on the machine where you can house the tamper. It can be used while it's attached to the top of the machine, or taken down for more leverage—this is an impressive extra design feature, since the many parts required in making espresso can make for clutter.
Espresso shots need to be pulled between 186 and 194 degrees F. If the water is too cold when it hits the espresso, the shot tastes sour. Too hot, and it tastes burnt. It’s trickier to hit this window if you also want your machine to steam milk, since steam requires a higher temperature — at least 212 degrees. But we struggled to get several of our machines just to pull decent espresso, never mind the milk. Sour shots were a clear sign that the water wasn’t hot enough; scorched shots indicated that the water climbed over 200 degrees.
Most people who have this in their homes are happy with it thanks to how easy it is to use and how delicious the coffee comes out. One person said they didn’t know how they managed without it. Some people did have issues with it breaking sooner than they would have liked, but they majority of those who own it were satisfied with the quality of the product.
For example, if your coffee tastes a bit salty or sour, the grounds are under-extracted, which can be remedied by a finer grind. But what if only some of your grounds are too coarse, and others are too fine – and maybe some are just right? Having uniform grind size throughout your brew basket makes it easier to isolate and adjust this variable in order to get the level of extraction you want. The only way to achieve that is with a burr grinder. Miller — as well as a handful of our other experts — recommends the Barazata Encore Coffee Grinder ($129).
In the semi-automatic machine, water pressure and temperature must be stable and consistent, and according to our expert, the pressure shouldn't be too high. Typically, coffee is brewed at a pressure of about 10 bars, and an ideal water temperature is around 195 degrees. Generally, the more expensive the machine, the better the equipment inside that regulates these two factors. High-quality machines tend to have a mechanism called a PID, or proportional-integral-derivative, controller. The PID's function is to maintain constant water temperature with extreme accuracy, down to the degree. Two central problems plaguing inexpensive espresso machines is that they lack a PID, meaning the temperature of the brewing water can fluctuate up and down and yield inconsistent results. Inexpensive machines often advertise that they have 15 or 20 bars of pressure as a selling point. But, higher pressure is not the priority, and too much pressure can actually lead to over-extraction and bitterness in your espresso shot. Therefore, we looked for a machine with good temperature and pressure control.
An early variant technique, called a balance siphon, was to have the two chambers arranged side-by-side on a sort of scale-like device, with a counterweight attached opposite the initial (or heating) chamber. Once the near-boiling water was forced from the heating chamber into the brewing one, the counterweight was activated, causing a spring-loaded snuffer to come down over the flame, thus turning "off" the heat, and allowing the cooled water to return to the original chamber. In this way, a sort of primitive 'automatic' brewing method was achieved.
Breville's 12-cup Precision Brewer is stacked with features that allow you to fully customize your coffee, like adjustable brew temperature, bloom time, strength and more. It also has settings for making cold brew, iced coffee, or the Specialty Coffee Association's standard Golden Cup. It's beautifully designed thanks to its sleek brushed stainless steel exterior and LED-lit digital display. Just note that you'll have to spend time exacting your preferred settings, especially when you first set it up.