Tamp: To ensure the espresso is evenly packed, your machine comes with a tamp, which you’ll press into the basket against the grounds. This step is important: When you pull a shot, the water will go to the place of least resistance, avoiding densely packed areas. This denser espresso won’t be properly saturated, making it under-extracted and sour, while the looser espresso will be over-extracted and bitter.
If you're ready to pull the trigger on buying an espresso machine, be prepared to shell out a little cash. Espresso machines can be wildly expensive. Rightfully so. Pulling a perfect shot requires precision: the machine must maintain both precise temperature and stable pressure throughout the brewing process. Achieving this stability is difficult and requires complex machinery, which is why you can find machines for upwards of 6,000 dollars.
The machine itself is large, but not as monstrous as some of the other grinders I tested. It's also very bottom-heavy, which makes it feel more durable than other machines and means it won't rattle all over your counter while grinding. The heavy-duty translucent plastic collection cup generates less static cling than the glossy clear plastic cups I tested, and the chute that connects the burrs to the cup collects less debris than other models. Cleaning is simple: Just remove the top burr and use the included wire brush to remove residual grounds.
The tall tower is fixed on a rectangular base, with a water tank that looks something akin to a trapezoid. The hard plastic funnel allows your favorite paper filters to fit inside of it. It is recommended that you use type 4 paper filters, however. You also have the option to use permanent gold filters if you want to move away from reoccurring costs.
Only two optional settings are available: You can control the heating element under the carafe and turn down the temperature if desired. Other than that, the Moccamaster doesn't have—and doesn't need—anything else. Technivorm boasts that its heating element can get water between 196ºF and 205ºF, which specialists say is the ideal temperature for brewing coffee.
In the semi-automatic machine, water pressure and temperature must be stable and consistent, and according to our expert, the pressure shouldn't be too high. Typically, coffee is brewed at a pressure of about 10 bars, and an ideal water temperature is around 195 degrees. Generally, the more expensive the machine, the better the equipment inside that regulates these two factors. High-quality machines tend to have a mechanism called a PID, or proportional-integral-derivative, controller. The PID's function is to maintain constant water temperature with extreme accuracy, down to the degree. Two central problems plaguing inexpensive espresso machines is that they lack a PID, meaning the temperature of the brewing water can fluctuate up and down and yield inconsistent results. Inexpensive machines often advertise that they have 15 or 20 bars of pressure as a selling point. But, higher pressure is not the priority, and too much pressure can actually lead to over-extraction and bitterness in your espresso shot. Therefore, we looked for a machine with good temperature and pressure control.
CR’s take: Though this Bialetti lacks typical drip-machine features such as programming and brew-strength control, it more than compensates with a Very Good rating in our brew performance test and a crisp 8-minute brew time. If you’re the type who sometimes prefers a morning shot of espresso to a cup of joe, this twofer—drip machine beside espresso maker—may be for you. It features a built-in milk frother, a permanent coffee filter, and auto-shutoff. CR does not yet have enough survey data on Bialetti machines to rate them on reliability and satisfaction, but when we do, we’ll add that info to our ratings.