Espresso machines can be intimidating. We wanted something that did not require reading a novel-sized manual, watching a lot of YouTube videos, or reading tons of articles about espresso pulling. Yes, making espresso does require some learning for the home brewer. That's part of the fun, but the machine shouldn't be discouraging and impossible to use out of the box.
The Rocket’s espresso lever is an upgrade from the simple on/off button used by most of our models. By only moving the lever part way up, you can play around with pre-infusing your coffee grounds before pulling the shot. Pre-infusion can be fun to tinker with as you try to home in on what makes your perfect espresso. This gives the Rocket an additional level of customization not available on the other models we tested.
“So simple and easy to use. I’ve had the older version for ten years, tested out and researched so many to try something different only to return to this one, and I have no regrets. I LOVE IT! Most coffee makers put out a lot of steam at the top, which is unfortunate when stored under a cabinet. This has zero steam on top of the coffee maker. Also, most water reservoirs have a lid that flips open, which is also inconvenient when stored under a cabinet. This lid slides side to side, and brews a whole pot of coffee in about three minutes. Very convenient for busy, on-the-go, impatient people like me.”
A grouphead (or group head) is the receiver for the removable portafilter (or group handle). A typical consumer espresso machine normally has only one grouphead, while popular professional machines, such as those used at commercial coffee shops, can contain anywhere from one to seven. During the process of extracting a shot of espresso, hot water is forced through the grouphead under pressure. The grouphead contains many holes (the shower) that attempt to distribute the pressurised water evenly over the surface of the grinds in the portafilter basket and thereby achieve an even cross sectional flow.
If you push the 54mm stainless steel portafilter into the hands-free grinding cradle, the grounds will go right into the filter. The grinder shuts off when it's done, too, so you don't have to worry about figuring out if you've got the right amount. Finally, the included 54mm tamper ensures that your grounds are evenly pressed, so you get the most out of your beans.
The gist: This espresso maker by LavoHome comes with all the essentials: a glass carafe and cover, filter basket, and tamper. The little powerhouse boasts 800 watts of power and brews up to 20 ounces of rich espresso. In the mood for a latte or cappuccino instead? It also comes equipped with a powerful steamer to make all of your favorite coffeehouse beverages. The glass decanter comes with a cool-touch handle for safe and easy pouring once your brew is complete.
The best part about this machine is that it comes with everything you need (except the beans). You don't have to spend an extra $100+ on a good grinder or $25-$100 on a milk frothing pitcher and tamper. You will pay a bit more for it than other machines on this list, but it's well worth it — especially now that this machine costs $548.96 instead of $999.99.
The term dual boiler is used narrowly for machines with two separate boilers, and more broadly for what are more properly called dual heater (DH) machines, featuring a boiler for brewing and a separate thermoblock (TB) for heating brew water to steaming temperature – opposite to HX machines, where the boiler is at steaming temperature and is cooled to brewing temperature.
The Breville machine was also the only semi-automatic model to produce a velvety, well-incorporated foam. The consistency with which it incorporated air made for a beautifully textured latte—and our coffee expert was even able to make some latte art with it (something that was impossible with the air bubbles from other models, including the Gaggia and all of the less expensive machines).
In later years, coffeemakers began to adopt more standardized forms commensurate with a large increase in the scale of production required to meet postwar consumer demand. Plastics and composite materials began to replace metal, particularly with the advent of newer electric drip coffeemakers in the 1970s. During the 1990s, consumer demand for more attractive appliances to complement expensive modern kitchens resulted in a new wave of redesigned coffeemakers in a wider range of available colors and styles.
Our brew-performance tests measure the brew temperature and contact time (how long water stays within a sweet spot of 195° to 205° F for brewing). We measure concentration using a refractometer, a device that measures the amount of coffee dissolved in each brew. Our convenience tests look at how easy it is to set timers, fill the reservoir, clean the machine, and more. And for the first time, we’re incorporating predicted reliability and owner satisfaction ratings into the new Overall Score for each model. We determine these ratings for each drip coffee maker brand using survey data collected from thousands of CR members.