An electric drip coffee maker can also be referred to as a dripolator. It normally works by admitting water from a cold water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminum), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally-induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10-12 cup drip coffeemaker, using a more powerful thermostatically-controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminum construction of most heating chambers to a metal with superior heat transfer qualities, such as copper.
Here at Seattle Coffee Gear, we are proud to carry an extensive selection of at-home and commercial espresso machines at some of the internet’s most affordable prices to help our customers brew excellent espressos from anywhere. Read on to learn more about the benefits and features of the espresso machines in our inventory, and place your order with us today!
The term dual boiler is used narrowly for machines with two separate boilers, and more broadly for what are more properly called dual heater (DH) machines,[citation needed] featuring a boiler for brewing and a separate thermoblock (TB) for heating brew water to steaming temperature – opposite to HX machines, where the boiler is at steaming temperature and is cooled to brewing temperature.
All the machines we tested came with either insulated carafes or glass pots with built-in warmers. Both have pros and cons. Glass pots are typically easier to clean because they tend to have wider mouths, and the lack of internal insulation means that glass pots will have a greater interior volume relative to its exterior volume — basically, it’s easier to get your hand or dish sponge into a glass pot. On the other hand, glass pots are more fragile and have to be heated from a base plate. In our tests, those base plates could even raise the temperature of the coffee, like with the CuisinArt, which can make coffee taste burnt.
It can take a little while to get to know the ins and outs of a new coffee maker. In CR’s labs, each drip coffee maker we test brews roughly 65 cups by the time our engineers are through with it. And brewing is just one of many aspects we look at. We test for handling and convenience, too, so you can choose a model that helps you sail through morning madness. 
×