You can check out our best milk frothers here. Some of you will stick with the machine's frothing wand, but you'll still need a milk frothing pitcher, so we recommend this one from Rattleware. Should you want a better tamper, we recommend this one from Rattleware. To save money on the coffee grinder, you can try this manual Hario Skerton Ceramic Coffee Mill, but if you want a high-end one, you may pay more than $200 for it.
Maintenance is simple on any of our drip coffee makers, with full frontal access for cleaning, refilling water and changing the coffee filter. All our coffee machines are user-friendly, so that brewing perfect coffee is a convenient, stress-free experience. Keep your counters uncluttered with convenient cord storage, and bring a little elegance to your kitchen with our sleek and attractive designs.
If you’re shopping for coffee at the grocery store, “check the roast date, rather than the ‘best by’ date,” says Awan. With mass market roasters, the “best by” date can obfuscate the window in which coffee beans are at their best: about 4 days after roasting, when some, but not all, of the carbon dioxide has escaped from the beans. (Too much carbon dioxide captured within beans tends to create uneven extraction, as the gas escapes — this is what pre-infusing tries to counter. Conversely, too little carbon dioxide in the bean can lead to a loss of flavor.)
Steaming milk is straightforward, utilizing a simple on/off switch, and we got some stunning microfoam. However, the process isn’t flawless. You’ll need to prime the steam wand prior to using it on your milk, or else water will drip into your pitcher as the steam begins to sputter out. This sputtering caused us to have a few larger bubbles, frowned upon by hardcore espresso lovers.
Served in a variety of drinks, espressos are made by machines that send pressurized hot water through finely-ground coffee beans—thus, the quality of the drink is dictated in large part by the quality of machine that brews it. Historically, the best espresso has been brewed in coffee shops with industrial-grade equipment. Today, continued innovation in the at-home espresso brewing industry has led to the creation of high-quality machines that can contend with some of the best baristas out there.
In the semi-automatic machine, water pressure and temperature must be stable and consistent, and according to our expert, the pressure shouldn't be too high. Typically, coffee is brewed at a pressure of about 10 bars, and an ideal water temperature is around 195 degrees. Generally, the more expensive the machine, the better the equipment inside that regulates these two factors. High-quality machines tend to have a mechanism called a PID, or proportional-integral-derivative, controller. The PID's function is to maintain constant water temperature with extreme accuracy, down to the degree. Two central problems plaguing inexpensive espresso machines is that they lack a PID, meaning the temperature of the brewing water can fluctuate up and down and yield inconsistent results. Inexpensive machines often advertise that they have 15 or 20 bars of pressure as a selling point. But, higher pressure is not the priority, and too much pressure can actually lead to over-extraction and bitterness in your espresso shot. Therefore, we looked for a machine with good temperature and pressure control.
All of the espresso machines we tested only included a single boiler for heating. This means that there's only one mechanism for heating both the water for brewing and the steamer wand. Because of this, it'll take the steamer wand a while to heat up after pulling the espresso shot, since the steamer wand operates at a much higher temperature than the brewing temperature of around 195°F. It is possible to buy a home machine with a double boiler (Breville makes one) but this raises the price significantly (we didn't test the Breville because it's over $1,000), and the minor wait time wasn't a major concern for us. We figured it wouldn't be for home brewers either.
The OXO On 12-Cup feels high-tech without being high maintenance. It’s beautifully constructed, with silicone gaskets, a stainless steel carafe, and sturdy-feeling plastic. But let’s go ahead and get its biggest downside right out there in the open. Of the 10 machines we tested, it took the longest to brew eight cups of coffee — nearly 15 minutes. It heats its entire reservoir of water to temperature before a drop touches the grounds, and if you’re jonesing for a full pot to start off your day, that wait is going to feel like a lifetime. This was particularly noticeable considering four of the machines we tested brewed the same amount of coffee in less than half that time. The Bunn BTX-B Velocity Brew could do it in three minutes flat.
“Self-identified coffee snob. Couldn’t be happier. Easy to operate, functions as advertised, instructions are clear. The metal filter included does what it needs to do. I recommend a relatively coarse grind (imagine the feel of cornmeal) with the metal filter to get the full flavor of the coffee. If you’re a bit of a coffee snowflake (no disrespect intended) and don’t like the ‘mud’ at the bottom of the cup, you should stick with the paper filter. Either way, the coffee maker itself does the job nicely.”
As legend has it, Ethiopian goats were the first to discover the delightful properties of coffee beans when they ate the raw beans right off the stem. The goats nibbled happily away at the beans, probably right around 2 o'clock every afternoon, until finally an astute goat herder noticed the goats' perky behavior, gave the beans a taste, found them quite stimulating, and rushed them off to the nearest monastery.
The machine itself is large, but not as monstrous as some of the other grinders I tested. It's also very bottom-heavy, which makes it feel more durable than other machines and means it won't rattle all over your counter while grinding. The heavy-duty translucent plastic collection cup generates less static cling than the glossy clear plastic cups I tested, and the chute that connects the burrs to the cup collects less debris than other models. Cleaning is simple: Just remove the top burr and use the included wire brush to remove residual grounds.
"If I could give this more than 5 stars I would. I love espresso drinks from coffee shops, I used to drink just regular coffee but when I quit smoking the taste changed just enough that I didn't like it anymore. Mexican mochas on the other hand I still found palatable. But they're about 5 bucks a pop at my local coffee shop. I also didn't want to spend 150$+ on an espresso machine, they seem prone to breaking and judging by the reviews never really work right. So I settled on this, figuring I would try it and if it didn't make what I wanted I'd only be out about 30 bucks. It makes delicious coffee. Put some full city roast in their and fire it up and what comes out is espresso. From my readings I've gathered that its not actually espresso, as the Moka pot doesn't make enough pressure for it to be real espresso. But its playing the part convincingly, I can't tell the difference between what comes out of this and a shot of espresso. Its paid for itself a dozen times over at this point. Absolutely one of the best purchases I've ever made. I couldn't be happier."
CR’s take: Our highest-rated drip brewer with an insulated, thermal carafe, the Ninja Bar Brewer CF085 has plenty to recommend it. CR’s testers find that it offers superb brew performance and is very easy to use. In our member surveys, Ninja drip coffee makers received an Excellent rating for owner satisfaction. (We don’t yet have enough data to judge reliability.) This model has a full suite of features, including an unusual over-ice brew mode for making iced coffee. Ninja claims its thermal carafe will keep coffee hot for 2 hours, and the machine comes with a milk frother and a standalone French-press brewer. These features come at a price, of course; the Ninja Bar Brewer is the second most expensive model on this list.