We tested 12 models by making shots of espresso and lattes on each machine. We enlisted the help of an expert from Students of Coffee, a group of coffee educators and roasters at New York University, to judge for quality. The majority of the models we tested were semi-automatic, meaning brewers still have to grind the coffee and pack it in the portafilter (the little filter cup with a wand that you place in the front of the machine). Semi-automatic espresso machines heat the water for you, and then pump it through the grounds at varying levels of pressure, depending on the machine. The semi-automatic models we tester were:
CR’s take: Like the model above, the Cuisinart Burr Grind & Brew takes whole coffee beans and grinds them fresh for each pot. It features programming, brew-strength control, a water filter, a permanent coffee filter, and auto-shutoff. This model earns a great rating for carafe handling. The stainless steel finish and glass carafe certainly elevate the experience of using it. Cuisinart brewers also received an Excellent rating for owner satisfaction. But the performance and finish come at a premium—this machine costs significantly more than the Black+Decker Mill & Brew.
In France, in about 1710, the Infusion brewing process was introduced. This involved submersing the ground coffee, usually enclosed in a linen bag, in hot water and letting it steep or "infuse" until the desired strength brew was achieved. Nevertheless, throughout the 19th and even the early 20th centuries, it was considered adequate to add ground coffee to hot water in a pot or pan, boil it until it smelled right, and pour the brew into a cup.

While clever baristas are always coming up with twists on common coffee staples, the most popular beverages are based on a shot or more of espresso and steamed milk with a layer of foam artistically placed on top. Cappuccino is among the most popular espresso-based drinks, but with some clever applications of milk and cream, they sky is the limit as to what you can create.
Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.
This product brings easy brewing and convenient cleaning to your countertop. With the brew-pause feature, you can sneak a cup while the coffee maker is still brewing without interrupting the process. The keep-warm function keeps your coffee nice and warm so you can come back again and again to a fresh-tasting cup. An easy cleaning cycle and durable dishwasher safe carafe help to reduce the time you spend cleaning up.

“I purchased the machine for myself as a birthday present, and I’ve had it for about six weeks. We have a Pavoni espresso machine, which my husband loves for his espressos, but I think it’s a pain for making lattes: grinding the beans, tamping down the pod, ‘pulling’ the lever (which will be really hard if you tamp it too densely), steaming the milk, and then cleaning the steaming wand, not to mention what a pain it is to refill the water chamber (turn off, wait till pressure is gone, then you can refill). Why am I listing all of these steps? Because that’s what you don’t have to worry about with the Lattissima! Here are my steps now: Turn on the machine, get the milk container out of the fridge and plug it into the front, put an espresso capsule in the top, stick a mug under the spout, and push the Latte button. Done. You do need to clean the frother, which is just putting another cup under the spout, turn the milk to “clean” and let it clean, then you can remove the milk container and stick it in the fridge. I clean the milk container once a week, soaking all the pieces in a bowl of hot, soapy water for a few hours.”
Our brew-performance tests measure the brew temperature and contact time (how long water stays within a sweet spot of 195° to 205° F for brewing). We measure concentration using a refractometer, a device that measures the amount of coffee dissolved in each brew. Our convenience tests look at how easy it is to set timers, fill the reservoir, clean the machine, and more. And for the first time, we’re incorporating predicted reliability and owner satisfaction ratings into the new Overall Score for each model. We determine these ratings for each drip coffee maker brand using survey data collected from thousands of CR members.
×