It also automatically pre-infuses the coffee, allowing the grounds to vent their CO2 and “bloom.” Remember, only half of the machines we tested had this feature, and it proved to pay off in our taste tests. The four machines we recommend all pre-infuse. Only one coffee maker without it, the Hamilton Beach, performed well at all in our taste tests — but that guy was so cheap and flimsy, part of the brew basket broke during our testing. Sorry, Hamilton Beach.
Above all, good espresso requires precision. If you’re looking for phenomenal tasting notes, flavor balance, and texture, there is simply no room for error in the machine, the beans, the user, or even the weather. And even if you’re not holding out for the best coffee on the planet, the margin for error is still slim. To test the machines, we pulled shots following the Italian Espresso National Institute's measurement guidelines and paid attention to the following markers of success:
If you don’t have the time or want to build a highly customized taste for your espresso mixes and just want a great tasting cup of espresso, super-automatic espresso makers are going to be your best bet. While you do give up some of the control you have over the final product, a super-automatic espresso maker automates almost all of the process for you, meaning that you can just get a great shot of espresso without having to do any extra work. This makes it perfect for people on the go or who prefer convenience over control.
The machine is super easy to use: just choose either a single or double shot, select your coffee grounds, fill the milk and water reservoir and choose your brew. The water reservoir is removable, allowing for easy fill-up in the sink. The Café Barista also boasts the fastest preparation time when compared to other Mr. Coffee espresso makers. And at less than $200, this model is WAY less expensive than some of its competitors, giving you a great bang for your buck.
Some machines use a single boiler kept at steaming temperature, but water for brewing is passed through a heat exchanger, taking some heat from the steam without rising to the same temperature. Although the water for brewing remains at a lower range than that required for steaming milk, it is still too hot for proper coffee extraction without first cooling; thus this type of machine requires a cooling flush of 4–6 seconds prior to the first espresso pull. Once the machine is dialed into the proper temperature, as many shots can be pulled as required without refreshing. However, if the user leaves the machine idle again for some period, the flushing process will need to be repeated. The HX variety is found in many mid-range machines and many users install thermometers to assist them is dialing in correct temperatures. There is some controversy as to the temperature stability of the brewing water, since it is indirectly converted from steaming temperature to brewing temperature, rather than kept at a brewing temperature.
An electric drip coffee maker can also be referred to as a dripolator. It normally works by admitting water from a cold water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminum), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally-induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10-12 cup drip coffeemaker, using a more powerful thermostatically-controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminum construction of most heating chambers to a metal with superior heat transfer qualities, such as copper.
Shopping links are provided by eBay Commerce Network and Amazon, which makes it easy to find the right product from a variety of online retailers. Clicking any of the links will take you to the retailer's website to shop for this product. Please note that Consumer Reports collects fees from both eBay Commerce Network and Amazon for referring users. We use 100% of these fees to fund our testing programs.
“I actually didn’t start drinking coffee on a regular, daily basis until four or five years ago. I got hooked on the smoothness and low acidity of cold-brewed coffee, and for the longest time, my ritual each morning was to visit Gimme! near my house on Lorimer. Recently, though, I’ve started making cold brew myself at home with the OXO Good Grips Cold Brew Coffee Maker. It’s not a true drip-coffee machine, but I’ve been very happy with this piece of equipment — it lets me tinker with different beans and concentrations, and produces enough cold brew to last me two weeks at a time. It also stacks compactly for storage, which is an absolute requirement for my tiny New York apartment.” — Dennis Ngo, caterer at Lonestar Empire
"A rare example of the meeting of form and function. This machine is both beautiful to look at and makes wonderful delicious espresso and cappuccino. I was hesitant to spend this much on a "coffee maker", but took into consideration what it costs to get a decent cappuccino from a cafe or Starbucks and finally gave in. Boy am I glad I did. All it takes to get me out of bed in the morning is the happy thought of pulling yet another delicious shot from this wonderful machine."
Water quality also plays a massive role in the way your coffee tastes. As we discovered in our review of the best water filters, water isn’t tasteless. Total dissolved solids (TDS) are what give “good tasting” water its sweetness — in fact, the SCAA recommends water with 150 milligrams per liter of TDS to brew coffee. (Want to check your water? A TDS reader is only about 15 bucks.)
The gist: The Nespresso Pixie is an Amazon's Choice product and boasts a 4.5-star rating. It pumps espresso with 19 bars of pressure and has a 25-second heat-up time. It has two one-touch buttons (in case you want a single espresso or a slightly larger "Lungo" serving), a 0.7 liter water tank and an empty water tank alert that let's you know when you're running low on H2O. The machine also comes with a welcome kit that includes a range of capsules featuring various flavors.
CR’s take: If you’re an aficionado of fresh ground coffee, this Black+Decker is the brewer to buy. As the name suggests, the Mill & Brew goes that extra mile, grinding whole coffee beans just before brewing. As a result, the machine is capable of making a great pot of coffee. Made of plastic with stainless steel accents, this model is easy to use and to clean, earning a Very Good rating in our convenience tests. It allows you to adjust brew strength, and it’s programmable, so you can set it to grind and brew just before you wake up.