CR’s take: Though this Bialetti lacks typical drip-machine features such as programming and brew-strength control, it more than compensates with a Very Good rating in our brew performance test and a crisp 8-minute brew time. If you’re the type who sometimes prefers a morning shot of espresso to a cup of joe, this twofer—drip machine beside espresso maker—may be for you. It features a built-in milk frother, a permanent coffee filter, and auto-shutoff. CR does not yet have enough survey data on Bialetti machines to rate them on reliability and satisfaction, but when we do, we’ll add that info to our ratings.
Some machines use a single boiler kept at steaming temperature, but water for brewing is passed through a heat exchanger, taking some heat from the steam without rising to the same temperature. Although the water for brewing remains at a lower range than that required for steaming milk, it is still too hot for proper coffee extraction without first cooling; thus this type of machine requires a cooling flush of 4–6 seconds prior to the first espresso pull. Once the machine is dialed into the proper temperature, as many shots can be pulled as required without refreshing. However, if the user leaves the machine idle again for some period, the flushing process will need to be repeated. The HX variety is found in many mid-range machines and many users install thermometers to assist them is dialing in correct temperatures. There is some controversy as to the temperature stability of the brewing water, since it is indirectly converted from steaming temperature to brewing temperature, rather than kept at a brewing temperature.
“Strength, blend, decaf, cream, or sugar, there are many options when it comes to a cup of coffee. It seems every person has his or her own unique preferences to get them that perfect cup of joe. However, one factor that was often out of the home-coffee fan’s control was temperature. You either drank it at the temperature it came out of the coffee maker or you let it cool somewhat before sipping began. Cuisinart has aimed to turn that limitation on its head. This Cuisinart DCC-3650 adds a temperature control. It actually brews the coffee at one of three different user-defined temperatures. Impressive.”
A portafilter (or group handle) attaches to the grouphead of semi-automatic and piston-driven espresso machines, and carries a tamped puck of coffee grounds within its basket. It is usually made of brass for better heat retention, and is attached by a plastic or wooden handle. The portafilter forms a seal with the espresso machine's gasket, and directs high-pressure hot water through the coffee puck. After-market retailers also sell bottomless portafilters that minimize the espresso's contact with any metal. A bottomless portafilter is one tool baristas use to analyze the quality of the coffee grind and the evenness of the extraction and allows for a visual check of "channeling" or the condition in which water is able to pierce a hole in the espresso puck during the brew process leading to poor extraction. Often, baristas use knockboxes to store their spent espresso grounds after they have pulled a shot.
You are pre-ordering a product that has not yet been manufactured. If you order today, it will be scheduled for shipment in 6 months or more. We've described Spinn as accurately as we can, but we may need to make changes to the final product. (If that happens, we'll let you know.) We’ll process your payment immediately, but you can get a complete refund, including shipping, at any time before your Spinn is shipped. By ordering you also agree to our Policy and Terms & Conditions.
For many of us, the daily grind can't begin until we've had that first cup of piping hot coffee—so the right brewer is at the top of the list. The most basic coffee makers make at least a decent cup, but a little more money buys conveniences such as programmability, a thermal carafe to keep coffee hot longer, settings that let you adjust brew strength, and more.