Hand-tooled and bench-tested in Italy, this espresso maker looks, works, and performs like it belongs in a small coffee shop, despite fitting tidily on your kitchen counter. This machine is built to last 10 to 15 years; less expensive machines at best might survive the five-year mark, and some can’t be expected to reach three. We also loved the sheer quality of every part included with our Rocket. The heft metal tamp fits perfectly in the machine’s own portafilter baskets and improved the shot-making experience of other machines when we used it with theirs.
Tamp: To ensure the espresso is evenly packed, your machine comes with a tamp, which you’ll press into the basket against the grounds. This step is important: When you pull a shot, the water will go to the place of least resistance, avoiding densely packed areas. This denser espresso won’t be properly saturated, making it under-extracted and sour, while the looser espresso will be over-extracted and bitter.
Certified by the SCAA and SCAE, this coffee maker exceeds the stringent quality control guidelines set forth by international coffee organizations. The inventor of this coffee maker, Gerard C. Smit has dedicated his life to creating coffee makers that do away with planned obsolescence, ensuring that this model – and every following model – is long-lasting, reliable, and energy-efficient.
Espresso shots need to be pulled between 186 and 194 degrees F. If the water is too cold when it hits the espresso, the shot tastes sour. Too hot, and it tastes burnt. It’s trickier to hit this window if you also want your machine to steam milk, since steam requires a higher temperature — at least 212 degrees. But we struggled to get several of our machines just to pull decent espresso, never mind the milk. Sour shots were a clear sign that the water wasn’t hot enough; scorched shots indicated that the water climbed over 200 degrees.
The gist: Taking the first spot on our list is the Breville BES870XL. This machine is no joke and its 4.3 star Amazon rating from over 1,800 reviews speaks to that. It boasts a 15 bar Italian pump and a 1600 watt thermo coil heating system. It comes with a 54mm tamper, a stainless steel conical burr grinder, and a 2-liter removable water tank. It's available in three colors: black, red, and silver.
That said, it’s not as elegant to use as the OXO machines. (Nor is it as nice to look at. One tester described its tall, bulbous body and squat carafe as “UFO-like.”) Take its eight-button controls, for example, which you use to toggle among brew modes, scroll up and down within the menu, and engage a manual brewing feature. Programming it to start brewing at a certain time was about as intuitive as setting an alarm on a clock radio — easy enough, but more technical than sleek. OXO definitely feels like the future; Behmor is more, “If it ain’t broke, why fix it?”
Some machines come with all the accessories you need to make espresso, but others don't. Check to see if your machine includes any accessories before you buy them. You will need a grinder to have freshly ground espresso, a milk frother or a milk frothing pitcher if you like foamy milk for cappuccinos or lattes, and a tamper to press down the coffee grounds before you make espresso. We explain why you need each one and recommend which ones to buy below:
If you're ready to pull the trigger on buying an espresso machine, be prepared to shell out a little cash. Espresso machines can be wildly expensive. Rightfully so. Pulling a perfect shot requires precision: the machine must maintain both precise temperature and stable pressure throughout the brewing process. Achieving this stability is difficult and requires complex machinery, which is why you can find machines for upwards of 6,000 dollars.
“I purchased the machine for myself as a birthday present, and I’ve had it for about six weeks. We have a Pavoni espresso machine, which my husband loves for his espressos, but I think it’s a pain for making lattes: grinding the beans, tamping down the pod, ‘pulling’ the lever (which will be really hard if you tamp it too densely), steaming the milk, and then cleaning the steaming wand, not to mention what a pain it is to refill the water chamber (turn off, wait till pressure is gone, then you can refill). Why am I listing all of these steps? Because that’s what you don’t have to worry about with the Lattissima! Here are my steps now: Turn on the machine, get the milk container out of the fridge and plug it into the front, put an espresso capsule in the top, stick a mug under the spout, and push the Latte button. Done. You do need to clean the frother, which is just putting another cup under the spout, turn the milk to “clean” and let it clean, then you can remove the milk container and stick it in the fridge. I clean the milk container once a week, soaking all the pieces in a bowl of hot, soapy water for a few hours.”
“Quite possibly the best investment I’ve made in an appliance to date. This powerful machine makes THE BEST COFFEE. I’m a coffee snob, so Keurig never impressed me, and I don’t have the space to purchase a full espresso machine. The Ninja system is compact, but offers a variety of brewing settings. Very easy to clean. Huge fan of this brand in general, and I’m so glad I made this purchase. Even comes with a travel mug.”
CR’s take: This Cuisinart drip coffee maker with a stainless steel finish and glass carafe earns an Excellent rating for brew performance. It’s programmable and features a water filter, a permanent coffee filter, cleaning mode, a cleaning indicator, and auto-shutoff. The machine also allows you to adjust the strength of your brew. For the money, this model offers style and features that are hard to beat. If you can live without the built-in grinder of the Cuisinart Burr Grind & Brew above, you can save yourself some money and still enjoy Cuisinart quality for a lot less.