Made in Italy by a company that has been manufacturing coffee makers for over 80 years, this espresso maker takes less than five minutes to produce up to 3 demitasses (2 ounces) cups of espresso. It is made from polished aluminum in a classic octagon shape that will look good on your stove or table, while the shape also helps to diffuse heat perfectly. It has a patented safety valve for protection and is easy to disassemble for cleaning.
The principle of a vacuum brewer was to heat water in a lower vessel until expansion forced the contents through a narrow tube into an upper vessel containing ground coffee. When the lower vessel was empty and sufficient brewing time had elapsed, the heat was removed and the resulting vacuum would draw the brewed coffee back through a strainer into the lower chamber, from which it could be decanted. The Bauhaus interpretation of this device can be seen in Gerhard Marcks' Sintrax coffee maker of 1925.
It can take a little while to get to know the ins and outs of a new coffee maker. In CR’s labs, each drip coffee maker we test brews roughly 65 cups by the time our engineers are through with it. And brewing is just one of many aspects we look at. We test for handling and convenience, too, so you can choose a model that helps you sail through morning madness.
Our brew-performance tests measure the brew temperature and contact time (how long water stays within a sweet spot of 195° to 205° F for brewing). We measure concentration using a refractometer, a device that measures the amount of coffee dissolved in each brew. Our convenience tests look at how easy it is to set timers, fill the reservoir, clean the machine, and more. And for the first time, we’re incorporating predicted reliability and owner satisfaction ratings into the new Overall Score for each model. We determine these ratings for each drip coffee maker brand using survey data collected from thousands of CR members.
Espresso machines can be intimidating. We wanted something that did not require reading a novel-sized manual, watching a lot of YouTube videos, or reading tons of articles about espresso pulling. Yes, making espresso does require some learning for the home brewer. That's part of the fun, but the machine shouldn't be discouraging and impossible to use out of the box.
The piston-driven, or lever-driven, machine was developed in Italy in 1945 by Achille Gaggia, founder of espresso machine manufacturer Gaggia. The design generically uses a lever, pumped by the operator, to pressurize hot water and send it through the coffee grinds. The act of producing a shot of espresso is colloquially termed pulling a shot, because these lever-driven espresso machines required pulling a long handle to produce a shot. Lever-driven espresso machines are sometimes called manual espresso machines because of this.
“This little espresso maker is just awesome! It is fun to use and always makes a great cup of espresso. I’ve used it to make macchiatos, affogatos, and as a espresso shot to my coffee. The simplicity of this stovetop espresso maker is amazing. You won’t get as much crema as you would with an espresso machine but the aroma and taste are unmatched. I’ve had the three-cup model for a few months now, and I use it often. I’ve had no problems with it at all. After it use I just rinse it with warm water and let it air dry.”
Experience gourmet boutique style coffee house coffee and Experience gourmet boutique style coffee house coffee and froth that will leave you wanting more. This battery-operated frother adds an expert touch to lattes cappuccinos and macchiatos. The soft-touch push down button and chrome stand make this easy to use and convenient to store. More + Product Details Close
For all the debate over whether the best coffee comes from a Chemex or a French press or an AeroPress (even Nespresso), sometimes you just want to turn on a machine and let it do the work. We asked ten coffee drinkers — food-industry professionals and just plain coffee snobs — what’s the coffee machine that’ll get you a simple at-home brew without all the fuss?
An early variant technique, called a balance siphon, was to have the two chambers arranged side-by-side on a sort of scale-like device, with a counterweight attached opposite the initial (or heating) chamber. Once the near-boiling water was forced from the heating chamber into the brewing one, the counterweight was activated, causing a spring-loaded snuffer to come down over the flame, thus turning "off" the heat, and allowing the cooled water to return to the original chamber. In this way, a sort of primitive 'automatic' brewing method was achieved.
An evenly tamped shot requires the tamp to fit into its portafilter basket precisely. Each machine comes with its own tamp, so we were surprised to find that not all of them fit. Some were too small, leaving behind a crescent moon of untouched coffee. It’s possible to try and compress in sections, but you’ll run the risk of re-tamping some of the grounds and producing an unpalatable shot.
When it comes to features, our top pick’s little sister, the OXO On 9-Cup Coffee Maker, looks and feels much the same: a single-button dial, programmable start times — even the timer that lets you know how old the coffee is after it’s been brewed is identical. On this version, the water reservoir isn’t detachable, but it brews coffee significantly faster than the 12-cupper’s 14 minutes(!) and it’s $100 cheaper. It’s a great machine that didn’t earn our top spot simply because the coffee it makes didn’t perform quite as well as the other three top picks in our taste tests, and it doesn’t let you tinker with water temperature and extraction the way the larger machine does.
The gist: The Litchi Portable is similar to the Cisco in that it's very simple to use. Rather than Nespresso pods, use the measuring scooping to add ground coffee to the two-filter basket. Then, add hot water to the chamber and manually push the pressure pump until the coffee comes out. Soon you'll be brewin' the good stuff into the little included cup (even add a little milk if you want to go the cappuccino route.)
In the semi-automatic machine, water pressure and temperature must be stable and consistent, and according to our expert, the pressure shouldn't be too high. Typically, coffee is brewed at a pressure of about 10 bars, and an ideal water temperature is around 195 degrees. Generally, the more expensive the machine, the better the equipment inside that regulates these two factors. High-quality machines tend to have a mechanism called a PID, or proportional-integral-derivative, controller. The PID's function is to maintain constant water temperature with extreme accuracy, down to the degree. Two central problems plaguing inexpensive espresso machines is that they lack a PID, meaning the temperature of the brewing water can fluctuate up and down and yield inconsistent results. Inexpensive machines often advertise that they have 15 or 20 bars of pressure as a selling point. But, higher pressure is not the priority, and too much pressure can actually lead to over-extraction and bitterness in your espresso shot. Therefore, we looked for a machine with good temperature and pressure control.
The Moccamaster isn't for everyone. Handmade in the Netherlands, it costs around $300—and would never win an award for value. It lacks a programmable timer, and it was also bit more difficult to set up than the rest of the coffee makers—in fact most were ready to go right out of the box. But a quick look at the instruction diagram should clear up any confusion, and the end result is well worth the effort.
*When you buy a machine with coffee credits you will receive a code with credits to buy coffee from curated roasters in the Spinn app. The credits will be uploaded in your account settings of the app. The credits allow for easy browsing and discovery of local and national coffee roasters. The credits will be used for automatically ordering when your Spinn machine is running low.
CR’s take: If you need only one or two cups of coffee each morning and you don’t want a pod coffee maker, consider the Technivorm Moccamaster Cup-One Brewer. Compact and clean-lined, it has a profile that makes some sense of its high price (it retails for more than $200), and it’s a superstar when it comes to reliability. Technivorm was one of only three drip machine brands to earn an Excellent rating for predicted reliability in our member survey. Our testers also give this machine a strong score for brew performance. This model has only one simple feature (auto-shutoff) and it’s not the easiest machine to use, but you can count on it to last.