It’s not that cone filters won’t make a great cup of coffee — the OXO On 9-Cup still ranked fifth out of 10 in our taste test. But flat bottoms generally allow for the grounds to be more evenly extracted and increase the coffee’s flavor. (It’s no coincidence our other three recommendations have flat-bottom brew baskets). You may have to do a little more tweaking to get this coffee maker’s brew to the best it can be, and that’s the other reason we like the 12-cupper more. This smaller version doesn’t let you tinker with water temperature.
The point of getting a great machine is that it takes the fuss out of your coffee making — if you’re going to fiddle around so much, why not just get a Chemex? But our refrain throughout this entire review has been that a coffee maker is only one part of the good-cup equation. Some methodical experimentation could reveal a whole world of taste you never knew you could achieve.
The Rocket’s espresso lever is an upgrade from the simple on/off button used by most of our models. By only moving the lever part way up, you can play around with pre-infusing your coffee grounds before pulling the shot. Pre-infusion can be fun to tinker with as you try to home in on what makes your perfect espresso. This gives the Rocket an additional level of customization not available on the other models we tested.
The machine is super easy to use: just choose either a single or double shot, select your coffee grounds, fill the milk and water reservoir and choose your brew. The water reservoir is removable, allowing for easy fill-up in the sink. The Café Barista also boasts the fastest preparation time when compared to other Mr. Coffee espresso makers. And at less than $200, this model is WAY less expensive than some of its competitors, giving you a great bang for your buck.
"I have used this machine for about a week, and it is awesome! I had used an espresso machine frequently years ago, but got sick of the grinding, prepping, priming, etc., especially before work in the morning. So, I eventually gave up and bought a plain-ole coffee maker. Unfortunately, "regular" coffee, to me, tastes like hot water. I even tried a Kuerig, but returned it within a month - it was more convenient, but the coffees are no higher quality than any grocery-store brand coffee. So I debated for a long time about whether I should wait for one of these brand-new Nespresso Vertuoline machines, or just buy one of the older, espresso-only Nespresso machines.
In the semi-automatic machine, water pressure and temperature must be stable and consistent, and according to our expert, the pressure shouldn't be too high. Typically, coffee is brewed at a pressure of about 10 bars, and an ideal water temperature is around 195 degrees. Generally, the more expensive the machine, the better the equipment inside that regulates these two factors. High-quality machines tend to have a mechanism called a PID, or proportional-integral-derivative, controller. The PID's function is to maintain constant water temperature with extreme accuracy, down to the degree. Two central problems plaguing inexpensive espresso machines is that they lack a PID, meaning the temperature of the brewing water can fluctuate up and down and yield inconsistent results. Inexpensive machines often advertise that they have 15 or 20 bars of pressure as a selling point. But, higher pressure is not the priority, and too much pressure can actually lead to over-extraction and bitterness in your espresso shot. Therefore, we looked for a machine with good temperature and pressure control.
Domestic electrification simplified the operation of percolators by providing for a self-contained, electrically powered heating element that removed the need to use a stovetop burner. A critical element in the success of the electric coffee maker was the creation of safe and secure fuses and heating elements. In an article in House Furnishing Review, May 1915, Lewis Stephenson of Landers, Frary and Clark described a modular safety plug being used in his company's Universal appliances, and the advent of numerous patents and innovations in temperature control and circuit breakers provided for the success of many new percolator and vacuum models. While early percolators had utilized all-glass construction (prized for maintaining purity of flavor), most percolators made from the 1930s were constructed of metal, especially aluminum and nickel-plated copper.
CR’s take: For $80, this Mr. Coffee 12-cup drip brewer is surprisingly stylish. Its airy design sets it apart from the blocky shapes common to the category. This model earns a rating of Very Good in CR’s brew-performance tests and makes a full pot in just 9 minutes. It offers brew-strength control, programming, and a permanent coffee filter. With its performance and striking appearance, you might not mind having it out on the counter—especially in a kitchen with a stainless fridge and range.
We tested 12 models by making shots of espresso and lattes on each machine. We enlisted the help of an expert from Students of Coffee, a group of coffee educators and roasters at New York University, to judge for quality. The majority of the models we tested were semi-automatic, meaning brewers still have to grind the coffee and pack it in the portafilter (the little filter cup with a wand that you place in the front of the machine). Semi-automatic espresso machines heat the water for you, and then pump it through the grounds at varying levels of pressure, depending on the machine. The semi-automatic models we tester were:
You might have heard that purchasing a double-boiler espresso machine or a proportional-integral-derivative (PID) controller will give you more accuracy and control over temperature. They’re definitely features to dig into for advanced espresso crafters, but expect to pay an additional $400 for a PID and $800+ for a second boiler. Since we wanted to focus on beginner machines, we stuck to single-boiler models without PID controllers for this review.
Tamp: To ensure the espresso is evenly packed, your machine comes with a tamp, which you’ll press into the basket against the grounds. This step is important: When you pull a shot, the water will go to the place of least resistance, avoiding densely packed areas. This denser espresso won’t be properly saturated, making it under-extracted and sour, while the looser espresso will be over-extracted and bitter.
“On mornings when I don’t make a pour-over (weigh out the water, the beans, all that fun stuff), the Capresso drip machine yields the cleanest-tasting cup that brings out beans’ floral flavors, without burning the grinds or yielding an overly acidic cup. It’s also got a built-in, conical burr grinder, which saves you from having to buy a separate gadget, too.” — Kat Odell, author of Day Drinking