The Rocket’s espresso lever is an upgrade from the simple on/off button used by most of our models. By only moving the lever part way up, you can play around with pre-infusing your coffee grounds before pulling the shot. Pre-infusion can be fun to tinker with as you try to home in on what makes your perfect espresso. This gives the Rocket an additional level of customization not available on the other models we tested.
That said, there is a true magic to having espresso at home, making yourself a cappuccino in your pajamas, and avoiding awkwardly waiting around the end of a bar with a cluster of strangers, all desperate to grab the first latte that hits the counter. Espresso is hard, but that doesn't mean it's impossible—especially if you're easy to please, ready to practice, and up for a good culinary challenge. There are lots of resources available online for learning how to make good espresso: Look up videos on YouTube, read articles and DIY books, and don't be too shy to ask your favorite barista for pointers—many of us love getting geeky on the technical stuff with our favorite customers.
For example, if your coffee tastes a bit salty or sour, the grounds are under-extracted, which can be remedied by a finer grind. But what if only some of your grounds are too coarse, and others are too fine – and maybe some are just right? Having uniform grind size throughout your brew basket makes it easier to isolate and adjust this variable in order to get the level of extraction you want. The only way to achieve that is with a burr grinder. Miller — as well as a handful of our other experts — recommends the Barazata Encore Coffee Grinder ($129).
We wanted to find the best espresso machine available to home brewers for less than $1,000. At this comparatively low price point, we hoped to find a machine that could pull a shot that—if not as high-quality as one served at a prized Italian cafe or as high-dollar as a Brooklyn coffee shop's—would have nuanced flavor, the right amount of brightness and acidity, and very little bitterness.
It’s obvious, but easy to forget: If you don’t clean out your coffee machine’s carafe after each use with soap and water, you’ll always end up tasting a little bit of yesterday’s now-bitter brew. Thermal carafes need to be hand-washed, but all the plastic components of our top picks — brew baskets, lids, etc. — are dishwasher-safe if you keep them on the top rack.
A grouphead (or group head) is the receiver for the removable portafilter (or group handle). A typical consumer espresso machine normally has only one grouphead, while popular professional machines, such as those used at commercial coffee shops, can contain anywhere from one to seven. During the process of extracting a shot of espresso, hot water is forced through the grouphead under pressure. The grouphead contains many holes (the shower) that attempt to distribute the pressurised water evenly over the surface of the grinds in the portafilter basket and thereby achieve an even cross sectional flow.
In 1901, Luigi Bezzera of Milan patented improvements to the machine. Bezzera was not an engineer, but a mechanic. He patented a number of improvements to the existing machine, the first of which was applied for on the 19th of December 1901. It was titled "Innovations in the machinery to prepare and immediately serve coffee beverage" (Patent No. 153/94, 61707, granted on the 5th of June 1902). In 1905 the patent was bought by Desiderio Pavoni who founded the La Pavoni company and began to produce the machine commercially (one a day) in a small workshop in Via Parini in Milan.
The method for making coffee in a percolator had barely changed since its introduction in the early part of the 20th century. However, in 1970 General Foods Corporation introduced Max Pax, the first commercially available "ground coffee filter rings". The Max Pax filters were named so as to compliment General Foods' Maxwell House coffee brand. The Max Pax coffee filter rings were designed for use in percolators, and each ring contained a pre-measured amount of coffee grounds that were sealed in a self-contained paper filter. The sealed rings resembled the shape of a doughnut, and the small hole in the middle of the ring enabled the coffee filter ring to be placed in the metal percolator basket around the protruding convection (percolator) tube.
“Strength, blend, decaf, cream, or sugar, there are many options when it comes to a cup of coffee. It seems every person has his or her own unique preferences to get them that perfect cup of joe. However, one factor that was often out of the home-coffee fan’s control was temperature. You either drank it at the temperature it came out of the coffee maker or you let it cool somewhat before sipping began. Cuisinart has aimed to turn that limitation on its head. This Cuisinart DCC-3650 adds a temperature control. It actually brews the coffee at one of three different user-defined temperatures. Impressive.”
A portafilter (or group handle) attaches to the grouphead of semi-automatic and piston-driven espresso machines, and carries a tamped puck of coffee grounds within its basket. It is usually made of brass for better heat retention, and is attached by a plastic or wooden handle. The portafilter forms a seal with the espresso machine's gasket, and directs high-pressure hot water through the coffee puck. After-market retailers also sell bottomless portafilters that minimize the espresso's contact with any metal. A bottomless portafilter is one tool baristas use to analyze the quality of the coffee grind and the evenness of the extraction and allows for a visual check of "channeling" or the condition in which water is able to pierce a hole in the espresso puck during the brew process leading to poor extraction. Often, baristas use knockboxes to store their spent espresso grounds after they have pulled a shot.
Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.
What Amazon users have to say: It's a beast. In a good way. And by that we mean this thing is in it for the long haul. Aside from the astounding beverage quality and ease that the machine produces, one of the most consistent comments made is that the machine will last you a while. Several customer reviews go on to say how they've had the Magnifica for a long time and love it just as much as the day they bought it, even after using it multiple times a day for several years. The machine is obviously a bit pricier than the others on this list, but according to reviewers, the machine is so consistently good and efficient that it pays for itself several times over when you account for all the money you'll save by skipping out on the coffee shops.
The Bonavita Coffee Brewer performs stellar when it comes to coffee drip brewing, easily outpacing more expensive coffee makers. It'll take about six minutes to create 44 ounces of coffee. Brisk brewing has caught the attention of the Specialty Coffee Association of America, since it's threshold for recognition is a brewing time of fewer than eight minutes.
This testing was designed to highlight the difference in how each machine extracted its coffee grounds. Remember, extraction is tied to water temperature, how long the grounds had to steep, and how evenly that water is distributed in the brew basket. (Depending on how the machine distributes the water and the shape of the basket, any particular ground may or may not receive the same amount of time in contact with water — thus any individual grind may be over-extracted, under-extracted, or just right.) Properly extracted grounds would have a balance of notes and aromas, from slight hints of acid to a pleasant amount of bitterness.