Before we get into the technical aspects of the two types of espresso machines, here’s what you really need to know. Semi-automatic espresso machines are going to be perfect for the espresso connoisseur. If you’re the type that really wants to get the best-quality and taste out of your espresso machine and don’t mind taking a little more time and effort out of your schedule, the semi-automatic espresso maker is going to be for you. It’s a little bit more work, but the key here is that you ultimately have more control over every subtle nuance that goes into your version of the perfect shot of espresso with a semi-automatic.
While it’s hands down the best cheap espresso machine on the market, Mr. Coffee isn’t on the same level with the Rocket or the Breville. Its shots lack the richness and complexity of true espresso, tasting more like a full-bodied Americano. Its layer of crema disappears quickly, and its shots don’t offer the gorgeous, gradient colors that you’d get from a machine like the Rocket. That said, it ranked fourth for taste among the machines we tested, so it’s still a solid option if you don’t need the finest coffee quality the market has to offer.
Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.
Made in Italy by a company that has been manufacturing coffee makers for over 80 years, this espresso maker takes less than five minutes to produce up to 3 demitasses (2 ounces) cups of espresso. It is made from polished aluminum in a classic octagon shape that will look good on your stove or table, while the shape also helps to diffuse heat perfectly. It has a patented safety valve for protection and is easy to disassemble for cleaning.
A portafilter (or group handle) attaches to the grouphead of semi-automatic and piston-driven espresso machines, and carries a tamped puck of coffee grounds within its basket. It is usually made of brass for better heat retention, and is attached by a plastic or wooden handle. The portafilter forms a seal with the espresso machine's gasket, and directs high-pressure hot water through the coffee puck. After-market retailers also sell bottomless portafilters that minimize the espresso's contact with any metal. A bottomless portafilter is one tool baristas use to analyze the quality of the coffee grind and the evenness of the extraction and allows for a visual check of "channeling" or the condition in which water is able to pierce a hole in the espresso puck during the brew process leading to poor extraction. Often, baristas use knockboxes to store their spent espresso grounds after they have pulled a shot.
An espresso machine brews coffee by forcing pressurized water near boiling point through a "puck" of ground coffee and a filter in order to produce a thick, concentrated coffee called espresso. The first machine for making espresso was built and patented in 1884 by Angelo Moriondo of Turin, Italy. An improved design was patented on April 28, 1903, by Luigi Bezzera. The founder of the La Pavoni company bought the patent and from 1905 produced espresso machines commercially on a small scale in Milan. Multiple machine designs have been created to produce espresso. Several machines share some common elements, such as a grouphead and a portafilter. An espresso machine may also have a steam wand which is used to steam and froth liquids (such as milk) for coffee drinks such as cappuccino and caffe latte.
“On mornings when I don’t make a pour-over (weigh out the water, the beans, all that fun stuff), the Capresso drip machine yields the cleanest-tasting cup that brings out beans’ floral flavors, without burning the grinds or yielding an overly acidic cup. It’s also got a built-in, conical burr grinder, which saves you from having to buy a separate gadget, too.” — Kat Odell, author of Day Drinking
On August 27, 1930, Inez H. Pierce of Chicago, Illinois filed patent for the first vacuum coffee maker that truly automated the vacuum brewing process, while eliminating the need for a stove top burner or liquid fuels. An electrically heated stove was incorporated into the design of the vacuum brewer. Water was heated in a recessed well, which reduced wait times and forced the hottest water into the reaction chamber. Once the process was complete, a thermostat using bi-metallic expansion principles shut off heat to the unit at the appropriate time. Pierce's invention was the first truly "automatic" vacuum coffee brewer, and was later incorporated in the Farberware Coffee Robot.
An electric drip coffee maker can also be referred to as a dripolator. It normally works by admitting water from a cold water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminum), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally-induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10-12 cup drip coffeemaker, using a more powerful thermostatically-controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminum construction of most heating chambers to a metal with superior heat transfer qualities, such as copper.
The gist: Okay, so in case any connoisseurs out there have been reading this section and thinking "a portable espresso machine takes the art away from espresso-making," this one's for you. Flair claims that this model was the answer to their question "What is the minimum needed to brew a professional-level shot of espresso?" The resulting product is this single-lever machine that doesn't need pods or electricity. It pulls a quality shot at 8-16 bars of pressure, has a 60ml water capacity, and brews a single cup in 25-45 seconds. You can get it in either black or chrome colors.
The Hamilton Beach 12-Cup BrewStation coffee maker offers convenient one-hand dispensing without a conventional glass carafe. There's no pouring or spills, and nothing fragile to break and replace. It’s impossible to get freshly brewed flavor from coffee that’s been sitting on a hot plate too long. That’s why the Hamilton Beach BrewStation was created to be the only coffeemaker that keeps coffee tasting fresh for up to four hours. This best-selling coffee maker works just like a...
CR’s take: For $80, this Mr. Coffee 12-cup drip brewer is surprisingly stylish. Its airy design sets it apart from the blocky shapes common to the category. This model earns a rating of Very Good in CR’s brew-performance tests and makes a full pot in just 9 minutes. It offers brew-strength control, programming, and a permanent coffee filter. With its performance and striking appearance, you might not mind having it out on the counter—especially in a kitchen with a stainless fridge and range.